PAGE 3 OF 3
0220 IH-8783
TROUBLESHOOTING
OPERATING ISSUE
RECOMMENDATIONS
Rewinder feeds supply,
instead of rewinding.
Ensure the direction switch is set properly.
Core does not stay on
core holder.
Ensure the inside core holder is the one with the small
metal clips on the edge.
Supply is pinched when
rewinding.
Ensure the outer disk has not been pushed in too far.
Rewinder is pulling
too hard on supply or
supply perforations are
breaking.
Ensure the supply is fed under the pick-up arm and then
attached to the empty core or coreless adapter.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
