U-Line H-8404, Быстрый старт

Страница: 1 / 9

PAGE 1 OF 9 0221 IH-8404
L-SHAPED PACKING
TABLES
1-800-295-5510
uline.com
H-8404
BASE TABLE
1. Insert adjustable feet (1) into legs (2) and slide into
place at desired height.
NOTE: If desired, insert locking tabs through legs
and adjustable feet to lock feet into place.
2. Place legs (2) in upright position. Legs should be
placed approximately 65" apart.
3. Attach 72" stringer (3) to table legs using center 4 holes
in back legs. Fasten with eight bolts, lock washers and
nuts.
4. Place lower shelf (4) across braces of legs. Attach lower
shelf using four nuts and bolts.
5. Place 72" tabletop (5) on a smooth, non-marring
surface with top side facing down.
6. Flip the assembled frame upside down and line up
with the pre-drilled holes on the bottom side of the top.
LEGS AND FRAME ASSEMBLY
# DESCRIPTION QTY
1 Adjustable Foot 7
2 Leg 3
3 72" Stringer 1
4 Lower Shelf 1
5 72" Tabletop 1
6 L-Leg 1
7 48" Stringer 1
8 48" Tabletop 1
3
1
2
4
5
8
7
6
TOOLS NEEDED
Phillips Head
Screwdriver
7/16" Wrench 3/8" Wrench
10 mm Wrench
(For Non-Steel Top Assembly)
1/4"-20 x 5/8" Bolt x 20
#14 x 3/4" Wood Screw x 38
1/4"-20 Nut x 20
Lock Washer x 20
Locking Tab x 7
Hardware Kit
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
Flat Head Screwdriver
Drill
(Optional)
3/16" Drill Bit
(Optional)