PAGE 3 OF 9
0521 IH-7767
USAGE CONTINUED
DEACTIVATE TIME DELAY
1. Enter: # - Master Code - # - 00 - # - 00 - #
2. The lock will indicate a valid setting change with a
single signal.
SECURING THE SAFE
The safe can be mounted to the floor. For optimal safety
and security, the safe should be installed in an isolated,
dry and secure area.
WARNING! The safe should always be kept out
of reach of children.
NOTE: Failure to mount will compromise the
safety and security of the safe.
1. Unlock safe and open door.
2. Remove safe floor carpet.
3. Look on the bottom of safe for four holes with cap
plugs.
4. Remove the cap plugs.
5. Position the safe in the desired location.
6. From inside the safe mark the location of the four
bolt down holes.
7. Move the safe aside to the clear marked spots for
drilling.
8. Using the 1/2" masonry drill, drill a 4" deep hole in
the marked locations.
9. Replace the safe in the desired location with the
holes in the safe aligned with the drilled holes in the
floor.
10. Pass each masonry anchor through the safe floor
into the drilled holes; making contact with the safe
floor.
11. Tighten each masonry anchor with the adjustable
wrench.
12. Replace safe floor carpet.
1-800-295-5510
uline.com
