PAGE 2 OF 9
1020 IH-7606
LEGS AND FRAME ASSEMBLY
NOTE: Tabletops add 1⁄ – 1⁄
"
depending on
top purchased.
1. Flip legs upside down. Place adjustable feet into legs
and slide to desired height. Fasten adjustable feet to
legs with two M10 x 65 hex bolts and two M10 nuts per
adjustable foot using a 17 mm wrench. (See Figure 1)
2. Turn legs upright and spread apart to accommodate
full depth bottom shelf. Place full depth bottom shelf
across leg braces. (See Figure 2)
3. While bottom shelf is sitting on leg braces, slide two
bottom shelf support bars underneath shelf and line
them up with outer holes in leg brace and shelf. Fasten
support bars to shelf and leg brace with four M8 x 40
hex bolts per support bar using a 13 mm wrench.
Fasten center of leg brace and shelf together with four
M8 x 40 hex bolts and M8 nuts using a 13 mm wrench.
(See Figure 3)
4. Position frame support bars so that the larger holes
are facing down. Line up with legs. Fasten support
bars to legs with four M8 x 65 hex bolts per leg using
a 13 mm wrench. (See Figure 4)
ASSEMBLY
Figure 3
Leg
Brace
Bottom Shelf
Support Bars
M8 x 40
Hex Bolts
M8 x 40
Hex Bolt
Figure 4
Frame Support
Bars
M8 x 65
Hex Bolts
Figure 2
Full Depth
Bottom Shelf
Leg
Brace
Leg
Brace
Figure 1
Adjustable
Feet
M10 x 65
Hex Bolt
M10 Nut
Leg
Leg