
PAGE 2 OF 18
1021 IH-7562
ASSEMBLY
Figure 2
1. With the undershelf on its side, push the legs through
the collars. (See Figure 1)
NOTE: In order for the tabletop to sit flush, the
distance from the bottom of the leg tube to the
bottom of the shelf leg collar, must be 6". To
ensure exact height, mark desired height on
each leg with magic marker or grease pencil.
2. Secure legs to undershelf with set screws using 5/32"
Allen wrench. Place set screw covers over screw
opening. (See Figure 2)
NOTE: Bottom shelf set screws must be covered
in order to meet NSF standards.
NOTE: Undershelf must be level. Use care not to
overtighten screws or failure will occur.
3. Stand table upright and place side panels over legs
with long lip facing down. Secure to bottom shelf
with two large Phillips head bolts per side panel.
(See Figure 3)
Figure 1
Leg
Undershelf
Set
Screw
Set
Screw
Cover
Side
Panel
6"
6"
6"
Figure 3
6"