PAGE 2 OF 3
0218 IH-7206
2. Insert core holders into each side of label roll.
3. Slide loaded roll into reel hanger bar. (See Figure 2)
NOTE: Labels should dispense from under the roll.
4. Feed label liner under guide rods. (See Figure 3)
5. Feed label liner between brush and strip plate.
(See Figure 4)
6. Adjust hub lock for guiding material.
7. Slide lock rod off take-up hub. (See Figure 5)
8. Secure label liner onto take-up hub.
Figure 3
Guide Rods
Figure 5
Take-Up Hub
Lock Rod
Figure 4
Liner
Hub Lock
How to Use
Small Hub Lock:
Slide onto rod.
Gently turn clockwise
until it locks into place.
INSTRUCTIONS CONTINUED
Figure 2
Core holders
Reel
Hanger Bar