PAGE 2 OF 6
0721 IH-6278
4. With second person holding assembled base in
place, use two 5/8" screws to secure each corner of
table frame. (See Figure 3)
5. Use three 1⁄" screws to secure each side along
length of table frame. (See Figure 3)
NOTE: Fully tighten bolts and screws.
6. With second person, set table upright. Adjust casters
to compensate for uneven floors.
ASSEMBLY CONTINUED
JOINING TABLES WITH GANGING BRACKETS
1. Align washer and bracket with hole at front of table
on the corner adjacent to second table to connect.
Use knob to secure. (See Figure 4)
2. Align washer with hole at front of second table and
use knob to secure. Do not fully tighten knob.
(See Figure 4)
3. Push tables together and rotate bracket from first
table to hook onto knob of second table between
washer and knob. Tighten knob of second table to
secure bracket. (See Figure 5a-b)
4. Repeat steps 1-5 to install ganging bracket at back
of tables.
Knob
Bracket
Washer
Figure 4
Figure 3
5/8" Screw
Caster
1/"
Screw
Tabletop Panel
1-800-295-5510
uline.com
Figure 5a
Figure 5b
