PAGE 1 OF 12
0819 IH-5655
π
H-5655
CEILING FAN
1-800-295-5510
uline.com
PARTS
SAFETY
WARNING! Disconnect power supply before
wiring connections are made to prevent
possible electric shock or damage to
equipment.
WARNING! Do not operate any fan with a
damaged cord or plug. Do not run cord under
carpeting. Do not cover cord with throw rugs,
runners or similar coverings. Do not route cord
under furniture or appliances. Arrange cord
away from traffic area and where it will not be
tripped over.
WARNING! Read and follow instructions
carefully. Failure to comply with instructions
could result in fire, electric shock, injury to
persons and/or damage to equipment.
WARNING! Do not use an extension cord with
this fan.
CAUTION! Follow all maintenance procedures
enclosed.
DANGER! Failure to properly ground unit could
result in severe electrical shock or death.
1. All wiring should conform to the National Electrical
Code ANSI/NFPA 70-1999 (NEC) in the United States,
CEC and local regulations.
2. Do not mount in an area that will allow the ceiling
fan to come in contact with moisture.
3. Make certain the entire installation is grounded as a
precaution against possible electrical shock.
4. Do not exceed maximum amperage rating of the
ceiling fan, as overloading can result in damage to
ceiling fan.
5. When wiring an electrical appliance or device,
follow all electrical and safety codes, as well as the
most recent NEC, CEC and local regulations and the
Occupational Safety and Health Act (OSHA).
6. Suitable for use with solid state speed control.
NOTE: After opening carton, look for concealed damage. If
concealed damage is found, immediately file claim with carrier.
TOOLS NEEDED
9/16" Wrench
Power Drill
Flat Head Screwdriver
3/8" Wrench
Phillips Head Screwdriver
REPLACEMENT PARTS LIST
#
DESCRIPTION
1
18" Downrod with Rubber Support
2
Lower Canopy
3
J Hook
4
Upper Canopy
5
Blade
6
Capacitor
7
Motor Housing With Yoke
3
7
6
1
4
2
5
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
