U-Line H-5598 Скачать руководство пользователя страница 2

Страница: 2 / 3

PAGE 2 OF 3

0316 IH-5598

INSTALLATION CONTINUED

3. Slide the cap catch bin onto the mounting bracket.

(See Figure 2)

4. Connect the lid by pushing the three pins into the

clips located on the cooler. (See Figure 3)

5. Flip the base upside down to install the rigid casters

using the caster mounting hardware. (See Figure 4)

6. Ensure both rigid casters are installed on the same

side of the base. (See Figure 4)

7. While the base is upside down, place the bolts

through the caster holes from the top. From the

bottom, secure the washer on the bolt followed by

the nut and tighten using a wrench and the Phillips

screwdriver. (See Figure 4)

8. Repeat on the other side of the base with the

locking casters.

9. Place cooler onto the base ensuring the Igloo logo

on the base is on the same side as the cooler opens.

(See Figure 5)

Figure 2

Figure 3

Figure 5

Figure 4

Locking

Casters

Rigid

Casters

Igloo

Logo

Содержание H-5598

Страница 1: ...ort screws and bottle opener from bag Line up the bottle opener with the two most upper holes Using the Phillips screwdriver tighten the short screws into the cooler See Figure 1 NOTE The holes are no...

Страница 2: ...s are installed on the same side of the base See Figure 4 7 While the base is upside down place the bolts through the caster holes from the top From the bottom secure the washer on the bolt followed b...

Страница 3: ...r back side as this could cause tipping When transporting the cooler by vehicle separate the cooler from the rolling base to avoid tipping the loaded cooler Not intended for use with hot liquids The c...