PAGE 1 OF 2
0915 IH-5334
π
H-5334
TABLETOP PAPER
MACHINE
1-800-295-5510
uline.com
TOOLS INCLUDED
TOOL NEEDED
1/8"
1/2" Wrench
5/16"
Allen Wrench
1. Remove all parts from the three shipping cartons.
2. Position the tabletop base on flat workstation
surface.
3. Rotate the base so the
shaft channel is facing
the direction you want the
paper to exit the machine
from. (See Figure 1)
4. Fasten the base to
workstation using holes
in base. (Figure 1)
NOTE: Mounting
bolts not included.
5. Rotate black collar so
the shaft channel is on
the opposite side of
the groove in the collar.
(Figure 1)
6. Fasten spring-loaded
pin and spacer using a
1/2" wrench all the way
into the welded nut on
the front of the bottom
mast. (Figure 2)
7. While pulling
spring-loaded
pin, place bottom
mast onto the
shaft of the
tabletop base.
Lower the body
so crossbar fits
into black collar
groove.
(See Figure 3)
8. Release spring-loaded pin and rotate body until the
pin clicks into the channel on the shaft.
9. Position top mast
so the paper exit
is facing front.
Insert the top mast
into the top of
the bottom mast.
Secure with 3/8-16
x 3/4" bolts and
3/8" lock washers
(2 each). (See
Figure 4)
10. Pull spring-loaded
pin out and turn
unit 180 degrees.
ASSEMBLY
Tabletop Base
Collar
Groove
Black
Collar
Shaft
Channel
Figure 1
Figure 2
Figure 4
Bottom
Mast
Top
Mast
Figure 3
Bottom
Mast
Black
Collar
Groove
