PAGE 2 OF 6
1023 RH-5048
Figure 3
Figure 4
Figure 5
Figure 6
4. Once a month or as necessary, hand or machine
wash the micro cloth filter and let it air dry. Do not
put it in the dryer. (See Figure 3)
DOME FILTER
1. Once a week, or as necessary, clean the dome filter.
2. First, remove the Intercept® Micro Filter bag and
cloth filter. Reach into the vacuum body and pull
the top piece of the dome filter off and remove the
foam media. (See Figure 4)
3. Shake out the foam, rinse it and let it air dry
thoroughly. (See Figure 5)
4. Once dry, replace the foam and firmly snap the top
of the dome filter into place.
HEPA EXHAUST FILTER
1. Once every two weeks or as necessary, inspect the
HEPA filters. When the filter becomes discolored,
replace it with a new filter. For best results, this filter
should be replaced every six months.
2. To inspect or replace the HEPA filter, turn the tab
clockwise to open the filter door. Grasp the plastic
housing on the HEPA filter to remove. (See Figure 6)
3. To replace the filter door, align the tabswith the slots
in the housing close. Be sure to close the door firmly
and turn the tab counterclockwise to lock. You should
hear an audible click if closed correctly.
FILTER MAINTENANCE CONTINUED
1-800-295-5510
uline.com
