U-Line H-3402, Быстрый старт, Страница: 2 / 6

PAGE 2 OF 6 0421 IH-3402
CHANGING DUAL-PURPOSE SWITCH SLIDES
• Slides have the words "TOGGLE" and "ROCKER"
molded on opposite sides.
1. When "TOGGLE" appears through
the cover, the lockout device is
set for a toggle-style switch.
(See Figure 1)
2. When "ROCKER" appears through
the cover, the lockout device is
set for a rocker or paddle-style
switch. (See Figure 2)
3. To change between "TOGGLE" and
"ROCKER," apply firm pressure to
remove Dual-Purpose Switch Slide
from base. Flip the slide over and
snap back into place. Repeat on
second slide. (See Figure 3)
INSTALLATION ON SWITCH
1. Loosen or remove screws. Install wall switch lockout.
Tighten screws securely. (See Figures 4-5)
2. Move switch to
either off or on
position. Close
cover. Apply
safety padlock.
(See Figure 6)
UNIVERSAL WALL SWITCH LOCKOUT PARTS
UNIVERSAL WALL SWITCH LOCKOUT INSTALLATION
Rocker
Toggle
Figure 4
Figure 5
Figure 3
Figure 2
Figure 1
Figure 6
Lockout Cover
Lockout Base
Extra Long Slotted Screws
Apply "Danger – Locked Out Do Not Remove"
label to the cover. Choose either English/Spanish
or English/French.
Dual-Purpose Switch Slides
1-800-295-5510
uline.com