PAGE 5 OF 19
1015 IH-2812
AC Outlet
AC Adapter
OPEN AND CLOSE UNIT
OPEN UNIT
1. Insert the key into the lock on cover of the unit. Turn
the key in the clockwise position to unlock the unit.
Remove the cover. (See Figure 1)
When you open the unit for the first time,
you must remove the
Protective Pad and
Cardboard Insert
. Plug the AC Adapter
into the back of the unit. Refer to Remove
Protective Pad and Cardboard Insert/Plug
AC Adapter into Unit below. (See Figure 2)
Ribbon may dislodge. To avoid damage to
the printer, press the ribbon cartridge firmly
into position after removing the protective pad.
Refer to Remove Protective Pad and Cardboard
Insert/Plug AC Adapter into Unit. (See Figure 2)
2. Remove protective pad and cardboard
insert. Plug AC adapter into unit.
(See Figure 2)
CLOSE UNIT
Replace the cover. Insert the key into the lock on the
cover of the unit. Turn the key in the counter-clockwise
position to lock the unit. Refer to Close Unit below.
(See Figure 3)
POWER THE UNIT/PRINT POSITIONING
Plug the transformer into the AC outlet.
Insert a card to get a sample print.
Refer to Power the Unit below.
(See Figure 4)
Print position from the card edge is adjustable by pressing
and sliding the print position button located on the right
outside bottom of the unit. Maximum distance from
edge of form to print is approximately 1⁄" (30 mm).
Refer to Print Position on Time Card below. (See Figure 5)
SETUP CONTINUED
Open Unit
Figure 1
Figure 2
Cardboard
Insert
Protective
Pad
AC Adapter
Figure 3
Figure 4
Figure 5
Close Unit
Power the Unit
Print Position on Time Card
