PAGE 2 OF 2
1012 IH-2624
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
REPLACING THE BLADE
WARNING! Use care when working near the
sharp blade.
1. Loosen, but do not remove the screws and nuts to
remove the blade.
2. Install the replacement blade with beveled cutting
edge pointing toward tape roll.
3. Seat blade on screws and center on blade clamp.
4. Tighten mounting screws and nuts to secure blade.
INSTRUCTIONS CONTINUED
OPERATING
1. Apply approximately 2" (48mm) of tape to the side
of the carton. (See Figure 3)
2. Pull the dispenser across the carton seam, applying
pressure to the tape roll to obtain a tight seal.
3. Continue to tape approximately 2" (48mm) past the
end of the box, down the side panel.
4. To cut the tape, push down and rotate the dispenser
slightly. (See Figure 4)
Figure 3
Figure 4
