PAGE 1 OF 2
1012 IH-2624
π H-2624
3M H128 2" HEAVY
DUTY TAPE DisPEnsEr
1-800-295-5510
uline.com
LOADING
1. Slide tape roll over flange. Dispense tape with
adhesive side facing down. Press down on roll to
fully mount on hub. (See Figure 1)
2. Thread end of tape through narrow guide slot. To
dispense the tape, hold the dispenser and pull the
leading edge of the tape from the roll. Allow the roll
to rotate freely on the dispenser. (See Figure 2)
INSTRUCTIONS
Flange
Figure 1
Guide
Slot
Figure 2
SPECIFICATIONS
Tape Width: 2" (48mm)
Tape Roll Diameter: Up to 5¾" (145mm)
maximum on a 3" (76.2mm) diameter core
