
PAGE 2 OF 9
0521 IH-2546
MOUNTING INSTRUCTIONS CONTINUED
3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3)
4. Drill into wall at four marked locations with
appropriate size drill bit. (See Figure 4) Insert wall
anchors if necessary.
5. Hold dispenser over previously drilled holes and
insert screws.
Recommended Mounting Locations
Figure 3
Figure 4
1. Insert key into lock opening on front of dispenser
and turn to open cover. (See Figure 5)
2. Remove two spindles by sliding them up and out of
dispenser (See Figure 6a) or out bottom of dispenser.
(See Figure 6b)
LOADING INSTRUCTIONS
Figure 5
Figure 6a
Figure 6b