PAGE 2 OF 2
0516 IH-2015
INSTALLATION CONTINUED
4. Pull plastic tab away
from magnifier head to
remove the plastic light
covering. (See Figure 5)
5. Gently pull old bulb off
the 4 pin connector
and replace with a new
H-2017 replacement
bulb. (See Figure 6)
NOTE: Replace
only with H-2017
(sold separately).
Other bulbs may
do damage to the
lamp function of
the magnifier.
6. Replace plastic light covering by reversing steps 3
and 4. Reset lamp into clamp on work surface.
OPTIONAL LENS (H-2016 – SOLD SEPARATELY)
1. Fix the magnifier head in a position parallel to the
ground.
2. Gently pull the tabs on
the front of the magnifier
away from the lens and
upward to release the
lens retaining ring.
(See Figure 7)
3. Lift the lens out of the
magnifier head and
carefully store to avoid
damage. (See Figure 8)
4. Carefully lower optional
replacement lens into
magnifier head.
5. Replace lens retaining
ring.
Figure 5
Figure 6
Figure 7
Figure 8
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
