PAGE 3 OF 3
0715 IH-1789
4. Assemble the side panels with the loops on the top
facing inward. Tilt the panel so it locks around the
posts on both ends and then slide down so the loops
are on top of the metal insert that was installed at
the top of the post. (See Figure 7)
5. Repeat with other side panel.
ATTACH BACK PANELS
1. Assemble back left panel first. Place the wires facing
downward into the loops on the side panel.
(See Figure 8)
2. Repeat for the back right panel.
3. After all the loops are lined up on top of the metal
inserts on the top of the posts, screw in the bolt on all
four posts and tighten using wrench. (See Figure 9)
4. Secure back panels with back panel brackets by
attaching brackets at top and bottom of the back
panels. Space third and fourth brackets evenly
in the middle of the back panel. Install brackets
through shelves for maximum security.
(See Figure 10)
Figure 7
Figure 8
ASSEMBLY INSTRUCTIONS CONTINUED
Figure 9
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Figure 10
Top Bracket
Middle
Brackets
Bottom
Bracket
