PAGE 2 OF 6
0522 IH-1222
4. Place lower shelves (4) across braces of legs. Attach
lower shelves using eight nuts and bolts. Now, fully
fasten hardware placed in step 3. (See Figure 2)
5. To attach tabletop (5) to frame assembly, place
tabletop on a smooth, non-marring surface with top
side facing down.
6. Rotate the assembled frame upside down and line
up with the pre-drilled holes on the bottom side of
the top.
NON-STEEL TOP ASSEMBLY
(Composite Wood, Laminate, Maple, Stainless Steel, ESD)
1. Using 24 wood screws, attach legs to the under side
of the top (5) through pre-drilled holes. (See Figure 3)
2. Set bench assembly upright and recheck all nuts,
bolts and screws for tightness.
STEEL TOP ASSEMBLY
Hardware pack includes:
DESCRIPTION
QTY
1/4"-20 x 5/8"
Bolts
41
1/4"-20 Nuts
29
Lock Washers
29
NOTE: There are two mounting channels
provided for installing an optional cabinet or
drawer.
1. Align leg holes to end of tabletop. Secure with six
1/4"-20 x 5/8" bolts. Threaded inserts are provided on
each tabletop end. (See Figure 4)
2. Attach center leg using four 1/4"-20 x 5/8" bolts, four
lock washers and four 1/4"-20 nuts.
NOTE: Center of table does not include
threaded inserts.
3. Set bench assembly upright and recheck all bolts
for tightness.
ASSEMBLY CONTINUED
Figure 3
Figure 4
1-800-295-5510
uline.com
Figure 2
