PAGE 2 OF 2
1213 IH-1132
1. Open dispenser cover.
2. Push in the slide until the dispensing opening is
exposed. (See Figure 4)
3. Select appropriate dispensing opening on insert and
rotate into position until it locks into place. Release
the slide so it fully opens. (See Figure 5)
ITEM #
BRAND
SETTING
S-7724
Uline
#3
S-13796
Uline
#3
S-7725
Scott
#1
S-11827
Scott
#1
S-12851
Kleenex
#3
4. Start roll from center by pulling out approximately
6" of leading edge.
5. Load roll by feeding leading edge downward into
opening. Make sure that roll is seated completely in
recess of dispenser. (See Figure 6)
6. Close the cover firmly while making sure the towel
doesn’t get caught inside.
7. Begin dispensing. Tear off the first few crumpled
sheets. (See Figure 7)
NOTE: To clean use a soft wipe with mild soap
and water.
LOADING INSTRUCTIONS
Slide
Insert
#4
#2
#1
#3
Dispensing Opening
Recess
Dispensing Opening
Figure 4
Figure 5
Figure 6
Figure 7
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
