PHONE 1-800-295-5510
FAX 1-800-295-5571
WEB uline.com
Pusher Spring Replacement
1. Loosen the screws and nut with a 8mm Spanner wrench and a 4mm Allen wrench.
2. Remove the Magazine Assembly.
3. Pull the Pusher back until it stops on the rod, rotate the Pusher to position.
4. Push the magazine seat back and remove it from the magazine.
5. Loosen the screw and nut with a 2.5mm Allen wrench and 7mm socket wrench.
6. Loosen the Rod with a 6mm Offset wrench and remove the Pusher guides.
Remove the Pusher.
7. Remove the Spring Pin with a hammer and 4 mm straight rod.
CHICAGO
•
MINNEAPOLIS
•
LOS ANGELES
•
NYC/PHILA
•
ATLANTA
•
DALLAS
