U-Line Echelon 2015R Скачать руководство пользователя страница 11

2015R — Refrigerator

02/2005

11

www.U-LineService.com

5. Remove the existing bottom pivot plate and replace 

with the Full Overlay pivot plate (see 

Figure 23

). 

IMPORTANT

Door panel and overlay panel must be aligned properly or 
the door will not operate correctly.

Assembling the Door

1. Install the assembled panel by sliding the original door 

panel back into the doorframe.

2. Replace the two-piece Modified Handle assembly and 

secure with the two screws removed in Step 6 under 

Removing Existing Door

.

3. Starting at the corners and working toward the center, 

push the door gasket back into place.

Installing the Door

1. Remove the existing hinges from the unit, saving the 

door closure assembly.

2. Install the new Replacement Top Hinge onto the unit 

(see 

Figure 24

).

3. Install the pivot post into the new Replacement Bottom 

Hinge (using the 7/64" hex key or Phillips screwdriver) 
and install the hinge onto the unit.

4. Replace the door closure assembly onto the bottom 

pivot post (see 

Figure 25

). Be sure that bosses on 

closers align with holes in hinge and hinge plate.

IMPORTANT

Pivot posts must be cleaned. Closers must also be clean 
and greased to ensure proper operation.

5. Place the modified door onto the pivot post.

6. Position door and install the pivot post into the top 

hinge (using the 7/64" hex key or Phillips screwdriver).

7. Adjust door as needed for proper closure.

8. Reinstall the door shelves by lining up the bosses and 

first pushing straight in, then down at a 45° angle (see 

Figure 33

 on 

Page 14

). Go on to 

5 Adjust Door

.

#8-32 x 3/8" SEMS Hex Screw

Two Places

Wood Panel Bottom Pivot Plate

(5/8" Longer Than

Existing Bottom Pivot Plate,

Flush Side Facing Out)

Existing

Door

Existing Bottom Pivot Plate

(Remove and Discard)

Figure 23

Top Pivot Plate

Door Panel

Wood Panel Top Hinge Plate

(5/8" Longer than Existing Top Hinge Plate)

#8-32 x 1/2"

Flat Head Screw

Three Places

Pivot Post

Figure 24

Wood Panel Bottom Hinge Plate

(5/8" Longer than Existing Bottom Hinge Plate)

#8-32 x 1/2" Flat Head Screw

Three Places

Door Closure Top

Door Closure Bottom

Pivot Post

Boss

Boss

Existing

Door

Figure 25

Содержание Echelon 2015R

















Отзывы: