8
Beverage Line Cleaning
You will need:
1. Cleaning Kit
Included: 1-quart cleaning pump
1 package of cleaning detergent
Faucet wrench
Faucet brush
2. Clean bucket
3. Fresh water
1. Close
CO
2
tank.
2. Pull pin on coupler to release pressure from keg.
3. Remove tap coupler from keg.
4. Remove
CO
2
line from tap coupler.
5. Open tap coupler to allow cleaning solution to flow through it:
• Push base of coupler inward and rotate clockwise.
6. Open cleaning pump.
7. Empty one packet of cleaner into plastic jar and fill with cool water.
Closed
Pin
Open
8. Reassemble pump.
Continued on
next page