QUICK START GUIDE
u-line.com
Remove LED Light Cover
1.
With a flat screwdriver, carefully pry LED light cover
from ceiling. LED light strip will hang down loosely.
2. Thoroughly clean and sanitize LED light cover
Note: DO NOT clean the LED light strip.
Reinstall LED Light Cover
1. Insert LED light strip into center slots of light cover
and hold in place.
2. Line up tabs on light cover with slots on ceiling light
fixture.
3.
Apply firm pressure evenly acrossed the length of the
cover until it snaps into place.
Hinge Pin
Bracket
Remove Door, Brackets, and Hinge
1. Hold door to keep it from falling.
2. Remove top hinge pin.
3.
Remove door by tilting forward and lifting door off
bottom hinge.
4. Take out screws and remove both hinges.
5.
On the door, remove 2 screws and take off bracket.
Repeat for bottom surface of door.
6. Thoroughly clean and sanitize all surfaces of the door,
the brackets, hinges, and all hardware.
7. Reinstall hinges, door, and all hardware by reversing
steps 1-5 above.
Hinge
Hinge
Hinge Pin
Bracket
SLOT
TAB
LED
LIGHT STRIP
LIGHT COVER
16
