background image

4

U-Line Combo Model and Ice MakerProduct Features

4 Product Features

Ice Makers Feature:

High ice production and storage.

 ADA15IM, BI2115 and BI98 

models produce up to 25 pounds of ice per day and store 25 
pounds. BI95 and SP18 models produce up to 23 pounds of ice per 
day and store 12 pounds. Combo

®

 Models produce up to 18 

pounds of ice per day and store 13 pounds and provide both ice 
production and refrigeration in one. CO1175 has 4.2 cubic feet 
and CO29 has 2.1 cubic feet refrigeration storage.

No drain required. 

Easy and inexpensive to install.

 

Only requires 

a 1/4" outside diameter water line.

Conserves on water. 

Uses under 3 gallons of water to produce 

22 pounds of ice or 2-1/4 gallons for 18 pounds.

Built-in or freestanding. 

Provides custom look when built-in 

with no additional venting clearance needed on sides, top or rear. 
Do not obstruct the grille.

Vinyl-clad cabinet. 

Textured, rich appearance. More resistant to 

scratching, peeling and flaking.

Door will accept a 1/4" panel.

 Ability to match surrounding 

décor and cabinets. Black and white models only.

Integrated handle.

 Does not add depth to the cabinet when 

built in. Black and white models only.

Field-reversible doors.

 Flexible installation options. All models 

with black and white doors are field-reversible. Stainless steel 
models must be order right- or left-hand hinged.

Flat recessed grille.

 Blends with the other models and 

integrates with surrounding cabinetry.

Defrost Type:

 Manual Defrost

For indoor use only. 

ADA15IM Model Features:

Factory installed door locks. 

Provides security and safety.

Stainless steel models. 

Offers a bold stainless steel habdle, 

stainless steel wrap door. Stainless steel models must be ordered 
right or left-hand hinged

Combo® Models Feature:

Mechanical Temperature Control.

 Provides ability to set the 

temperature. 

Adjustable tempered glass shelves.

 Sleek, streamlined 

interior. Allows flexible shelf locations to meet varying food and 
beverage storage needs. Three in 75, Two in 29.

In-door storage shelves.

 Two adjustable on 75 model and 3 on 

29 model. Easiest access storage area right where you need it. 
Adjustable to allow flexible storage options

CO1175 and BI2115 Model Feature:

Adjustable leveling legs.

 Achieve a more precise under counter 

fit. Durable, strong legs will not bend when unit is installed.

Stainless steel model. 

Offers a bold stainless steel handle, 

stainless steel wrap door. BI2115 has full wrap. CO1175 has black 
"cap" on top and bottom of the door. Stainless steel models must 
be order right- or left-hand hinged.

BI2115 Model Features:

Optional 3/4" full overlay door panel kit. 

Provides a fully 

integrated appearance with surrounding décor while maintaining 
zero door clearance. Easy to install. Black and white models only. 
Must order kit number U-OL2115.

Self-closing door. 

Engages when the door is open 8-10". Ensures 

a positive door seal and prevents door bounceback.

Contemporary grille design. 

Integrates seamlessly with 

surrounding cabinetry.

Содержание CO1175






















Отзывы: