PAGE 2 OF 9
0321 IH-4351
INSTRUCTIONS
Figure 1
Figure 2
1. To assemble left side, align holes of side panels and
posts and attach with nuts and bolts. (See Figure 1)
NOTE: Use 10 nuts and bolts per post.
Do not fully tighten nuts and bolts.
NOTE: Side panels overlap. Be sure to align
holes before attaching to posts.
NOTE: Side and back panels attach to
outside of unit.
2. Assemble right side. Repeat steps from above.
3. Align holes of back panels with right and left side
assemblies, then attach with nuts and bolts.
(See Figure 2)
NOTE: Use 10 nuts and bolts per post.
Do not fully tighten nuts and bolts.
NOTE: Back panels overlap. Be sure to align
holes before attaching to posts.
LEFT SIDE VIEW
BACK VIEW
Post
Post
Bolt
Bolt
Back
Panels
Nut
Nut
Side
Panels
Right Side Assembly
Left Side Assembly
