background image

11

U-Line 2000 Series Maintenance

1

2

1

6 Maintenance

Light bulb Replacement

To replace the light bulb in your U-Line unit:

1. Find the light located at the top of the unit. Grasp the edges of 

the light housing lens (1) opposite the exposed tab and gently 
push the lens toward the tab (2).

2. Pull the edge of the lens down (1) and swing it out of the light 

housing.

Removing and Installing Grille

WARNING

Disconnect electric power to the unit before removing 
the grille.

WARNING

DO NOT touch the condenser fins(4). The condenser 
fins are SHARP and can be easily damaged.

Removing the grille.

1. Disconnect power to the unit.

2. Loosen the two screws (1).

3. Remove grille (2) and grille cap (if equipped)(3) from unit.

Installing the grille:

1. Place the hook-hinge located on the rear bottom side of the 

grille (2) onto the front lip of the unit base. Swing the grille up 
into position. 

2. Align cabinet and grill holes and secure, but do not overtighten 

grille screws (1).

3. Reconnect power to the unit.

IMPORTANT

IMPORTANT

ALWAYS use a genuine U-Line replacement 120V 10 watt 
bulb (Part Number 31317) in the light housing. Use of any 
other bulb within the housing will produce excessive heat, 
causing damage to the light housing and cabinet interior, 
and will compromise the precise temperature control of 
the unit.

1. Replace the lens by first inserting the tab side back into the 

housing at a slight angle. 

2. While gently pushing the lens towards the tab end, push the free 

end into the housing, and release when you hear a snap.

For Models with adjustable leveling feet:

1. Use a level to check the levelness of the unit from front to back 

and from side to side. Place the level along top edge and side 
edge as shown (1).

2. If the unit is not level, rotate the adjustable leveling legs to raise 

or lower each corner of the unit (5) as necessary.

3. Check levelness after each adjustment and repeat the previous 

steps until the unit is level.

Leveling

IMPORTANT

IMPORTANT

Unit must be level, for proper door and ice maker (if 
equipped) operation. 

Typical Model Shown

4

1

2

5

Содержание 2000 SERIES





























Отзывы: