PAGE 6 OF 27
0820 IH-7242
SETTING UP THE DEVICE CONTINUED
Display air settings
Amount of air is
now adjustable.
Press to decrease air.
Press to increase air.
Even while the machine is running, press
to change
air settings by using or . While the machine is
running, the runtime sign will not show up.
HOW TO ADJUST SEALING TEMPERATURES
Display Air Pillows
Press 2 x
for temperature
settings.
Display temperature settings
Press to decrease
temperature.
Press to increase
temperature.
Even while the machine is running, press
to change
temperature settings by using or . While the
machine is running, the runtime sign will not show up.
HOW TO ADJUST RUNTIME
To produce a desired amount of air pillows, a specific
runtime can be set. Runtime is indicated in seconds,
and its factory setting is 180 seconds. The set runtime will
run down to zero and production will stop.
Display Air Pillows
Press 3 x
to get
the runtime menu.
Change runtime settings
Minimum setting is 1 second.
Maximum setting is 2,400 seconds.
Press to decrease runtime.
Press to increase runtime.
HOW TO CHANGE FILM TYPE
Changing the menu to a new film type when loading a
different kind of film.
Display Air Pillows
Press 6 x
until film
type shows up.
Press or to change the
film type.
FACTORY SETTINGS
The machine setting enables resetting all choices,
parameters, adjustments and changes back to the
factory settings.
Machine off
Power switch [O] display off
Press and hold while
switching on the machine.
Release the buttons +
when the display runs.
Power switch on
Power switch on [I]
All settings have been reset,
proceed with "Selecting Initial
Film Type" again to choose a film
type.
Air Pillows
ULINE S-22467
AIRmove
2
Air Pillows
ULINE S-22467
AIRmove
2
Connect_ _
Init_ _
HMI SW
22
Machine SW 1108977017
Reg nr
1
Air Pillows
ULINE S-22467
AIRmove
2
Runtime [s]
180
Air Pillows
Select Film type
Air Pillows
200mm/8inch
Select Set
Runtime [s] 180
Runtime [s] 180
