Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1120 Westport Chair
Assembly Instructions
Step 2 - Pull the Velcro® attached dust cover on the bottom of the Seat Frame (Part A) back to
expose the inner frame. Lay the Back Frame (Part B) on a flat surface like shown below.
Insert a
Wood Dowel
(Part F) into each hole on either side of the center hole in the Back
Frame. While using the Wood Dowels to locate each part, place the Seat Frame onto the
Back Frame. Insert the five Bolts with Washers (Part G) clockwise through the Seat
Frame
and into the Back
Frame
. Tighten the bolts using the Allen Wrench (Part H). Do not over tigthen
the bolts.
Step 3 - Insert the Front Legs (Part C) and Back Legs (Part D) into the corresponding notches in the
Seat Frame and Back Frame. Align the bolt holes in the Front Legs (Part C) with the bolt holes
in the Seat Frame. Insert four Bolts with Washers (Part G) through the Seat Frame and into the
Front Legs. Align the bolt holes in the Back Frame with the bolt holes in the Back Legs. Insert
four Bolts with Washers (Part G) through the Back Frame and into the Back Legs. Fully tighten
all the bolts using the Allen Wrench (Part H). Do not over tighten the bolts. Close the Velcro®
attached dust cover on the bottom of the Seat Frame.
C
A
B
G
H
F
F
C
D
D
G
H
G
