µ-Dimension D3206 Скачать руководство пользователя

Страница: 24 / 48

SCENE WIZARD –

The SCENE WIZARD allows for the programming and

operation of up to 32 lighting scenes. Naming of device and lighting scenes
gives user-friendly control of lighting loads. Proceed as follows:

Call Scene –

Used to choose which of the 32 programmed scenes are to be

called or activated. You may also call any scene with a different fade rate than
previously programmed. Proceed as follows:

NOTE:

Pressing a

SCENE

button

(refer to Figure 4)

will also call or activate a

programmed scene. In addition, pressing the function button will toggle though
the Scene Banks (01-08, 09-16...25-32) and then pressing a

SCENE

button

will activate that bank.

Scenes 01-08 for group 1 will have the following preset levels
preprogrammed with all 6 physical loads being programmed to the same
levels (factory set default):

Scene 1 10%

Scene 5 75%

Scene 2 25%

Scene 6 90%

Scene 3 40%

Scene 7 55%

Scene 4 55%

Scene 8 25%

Press the

Wizards

button and then the

Up or Down

button (if necessary) to select the SCENE WIZARD.
Press the

Select/Next

button to access the SCENE

WIZARD.

Press the

Select/Next

button to access the Call

Scene screen.

Press the

Up or Down

button to select the desired

scene to call (01-32). Press the

Select/Next

button

to save entry and proceed.

Press the

Up or Down

button to call a scene with a

desired fade time (default, 0:00 seconds to 2h00m).
Press the

Select/Next

button to save entry and

proceed.

NOTE:

This fade may be different from the fade time programmed in the

scene.

Press the

Select/Next

button to Execute Scene screen.

Program Scene –

Used to program, name and set fade-transition rates to

desired scenes. Proceed as follows:

Press the

Wizards

button and then the

Up or Down

button (if necessary) to select the SCENE WIZARD.
Press the

Select/Next

button to access the SCENE

WIZARD.

PROGRAMMING AND OPERATION

Use , v or SEL

<SCENE WIZARD>

Use , v or SEL
> Call Scene

SCENE 01

Set Fade: <def>

Select scene: 01

Scene 01

Use , v or SEL

<SCENE WIZARD>

DI-000-D3206-00B

11/6/03, 11:00 AM

Содержание D3206

















































Результаты поиска

Содержание D3206

Отзывы:

Похожие инструкции для D3206

Бренды по названию

Популярные бренды

µ-Dimension D3206, Руководство пользователя

Результаты поиска

Содержание D3206

Отзывы:

Похожие инструкции для D3206

Бренды по названию

Популярные бренды