Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#107 Chair
Assembly Instructions
Step 5 - Insert one Long Bolt (Part E) through each
of the four holes in the corner blocks located on the
underside of the Seat Cushion frame. Thread the
Long Bolts clockwise by hand.
E - Long Bolt
Step 7 - To install the Front Legs (Part C), match the Front Right Leg with the front right slot on
the Chair Seat. Insert the Front Right Leg into the notch in the frame of the Chair Seat.
Once inserted, slide the leg into position until the holes in the leg match the holes in the corner block.
Insert the Short Bolts (Part F) through the corner block and into the threaded inserts in the leg. Tighten
the Bolts using the Allen Wrench (Part H). Do not overtighten the Bolts. Repeat Step 7 to attach the
Left Leg.
C
Notch
Corner Block
Step 8 - Close the dust cover and with help, place the chair upright. Place the Pillow (Part D) upright
on the Chair Seat. Assembly is now complete.
Step 6 - Once all seven bolts have been hand
threaded, fully tighten them using the Allen Wrench
(Part H). Do not over tighten the Bolts.
