µ-Dimension BST 1200es, Руководство пользователя

Страница: 42 / 74

42 Operation
Dimension BST 1200es / SST 1200es User Guide
Resuming Build from Pause Mode
If you have pressed
Pause
, and are ready to resume building the
part, press
Resume
. Dimension resumes modeling.
Resuming Operations from Standby
Mode
After several minutes of inactivity, Dimension enters Standby mode.
During Standby, the head temperature will decrease to save
energy.
The display panel shows,
Standby
and
Cooling Down
. The
printer temperatures are also displayed;
M
= Model,
S
= Support,
E
= Envelope.
Press the
Resume
button - The printer returns to the Idle mode as
described in “Building a Part From Your File” on page 38
Canceling a Job
You can cancel a job at any time while the part is building.
Cancel a job:
1. Press
Pause
.
2. Once Dimension stops building, press
Cancel Build
.
The panel displays Are you Sure?
3. Press
Yes
. The panel displays Build Stopped followed by the
part name.
4. The panel prompts you to remove the part and replace the
modeling base ( “Inserting a Modeling Base” on page 30 ). Once
the chamber door has been opened and closed, the panel
asks: Part Removed?
5. Press
Yes
only after removing the part - refer to "Removing a
Completed Part"