µ-Dimension BST 1200es, Руководство пользователя

Страница: 38 / 74

38 Operation
Dimension BST 1200es / SST 1200es User Guide
Building a Part From Your File
1. If a part has not been sent to the printer for build (the build
queue is empty):
NOTE
For detailed information about the CatalystEX Build Queue, refer
to
“Sending Your CAD File to the System” on page 39
and the
CatalystEX Help files.
a. The panel displays
Idle
and
Queue Empty
.
b.
Wait for Part
is blinking. Choose whether you want to
start the build process from a ‘remote’ location or from the
display panel at the printer.
(1) At Printer ‘Start Model’ - You send a part to the printer
from your CatalystEX work station. You start the build
of the part from the printer.
(a) Do not press the
Wait for Part
button.
(b) From your CatalystEX work station, send a part to
the printer.
(c) The printer panel displays the name of the first
model in the printer queue and
Start Model
is
blinking.
(d) From the printer, press the
Start Model
button
to begin building the displayed part.
(2). Remote ‘Start Model’: - You send a part to the printer
from your CatalystEX work station. The part
automatically begins to build.
(a) From the printer, press the
Wait for Part
but-
ton.
(b) Make sure an empty modeling base is installed,
then answer Yes to the prompt
Is Model Base
Installed?
(c)
Wait for Part
is displayed in the upper
window. Press
Cancel
if you wish to exit the
remote start mode.
(d) From your CatalystEX work station, send a part to
the printer. The printer will automatically start to
build the model.