AutoGetWifi Intelligent Fiber Endface Microscope
29
Figure3-22
3.4.2 PC software settings
Image display area: Display measurement results.
Task: Measurement tasks can be selected.
Setting: Software system settings and measurement task settings.
ID: ID numberwill be saved in data, report file
INC□:The ID number is automatically increased after the measurement.
Connect: Connect or disconnect wifi.
Measurement: Trigger software measurement function.
Measurement results area: PASS or FAIL.
Overlay:Check to display the measurement results in image mode.
Save: Data or report saving mode.
Local: Click to open the path to save data and report.
Device: Click to open SD card of the device.
Task setting interface: The task setting function is consistent with the device software task setting
function.
