OWNERS MANUAL
FOR SENSATA TECHNOLOGIES
DIMENSIONS INVERTERS
Model ADI-64/1000
Model ADI-64/2100
Model ADI-64/3600
Including Option D, F & T
Table of Contents
Page
1. General . . . . . . . . . . . . . .
2
2. Description . . . . . . . . . . .
2
3. Installation . . . . . . . . . . .
2
4. Start Up/Operation. . . . . .
4
5. Troubleshooting. . . . . . . .
4
6. Installation Figure 1 . . . . .
5
7. Limited Warranty . . . . . . .
6
1. GENERAL
1.01 Dimensions inverters have been de-
signed and manufactured for many user applica-
tions and long life. They utilize patented con-
struction methods and high technology elec-
tronic parts and circuitry.
1.02
CAUTION: Inverters produce hazardous
voltages, to avoid risk of harm or fire the unit
must be properly installed. There are no user
serviceable parts inside, do not remove the
cover.
CAUTION: The inverter should not be mounted
in a location that may be exposed to rain or spray.
CAUTION: The inverter should not be installed
in a zero clearance enclosure.
CAUTION: Damage to the inverter will occur if
correct polarity is not observed when installing
the DC input cables.
CAUTION: Damage to the inverter will occur if
an external AC power source is applied to the
inverter’s AC output or it’s hardwire output.
CAUTION: The inverter contains a circuit breaker
and capacitor that may produce a spark. Do not
mount in a confined battery or gas compart-
ment.
CAUTION: Working in the vicinity of lead-acid
batteries is dangerous. Batteries generate explo-
sive gases during operation. There is a risk of
acid exposure. There is also a risk of high current
discharge from shorting the battery that can
cause fire and explosion.
CAUTION: Be sure both the inverter and, if
used, the external AC input circuit breaker or
fuse are turned "OFF" during installation.
2. DESCRIPTION
2.01 The inverter converts 64 VDC to 120
VAC, 60 HZ, having a quasi-sine wave form.
2.02 Units with the "F" option have 220
VAC, 50 Hz output. Units with the "D" option
have 120/240 VAC, 60 Hz output.
2.03 The inverter has internal protection
against output short circuit, output overload and
high temperature conditions. Also, there is a
thermally controlled cooling fan.
2.04 The inverter is designed to operate
almost any 120VAC (120/240VAC with "D" op-
tion), 60 HZ, single phase equipment within its
power ratings, unless the equipment is specifically
designed for a pure sine waveform.
3. INSTALLATION
3.01 The following instructions should be
toroughly read and understood before installa-
tion.
3.02
CAUTION: Inverters produce hazard-
ous voltages, to avoid risk of harm or fire the unit
must be properly installed.
CAUTION: Damage to the inverter will occur if
correct polarity is not observed when installing
the DC input cables.
CAUTION: Damage to the inverter will occur if
an external AC power source is applied to the
inverter’s AC outlet or it’s hardwire output.
CAUTION: Be sure both the inverter and the
Page 2
