u-blox ZED-F9P Interface Description - Manual
Advance Information
6.7.12 CFG-NAVSPG: Standard Precision Navigation Configuration
This group contains configuration items related to the operation of the receiver at standard precision, including
configuring postition fix mode, ionospheric model selection and other related items.
CFG-NAVSPG-* Configuration Items
Configuration Item
Key ID
Type Scale
Unit
Description
CFG-NAVSPG-FIXMODE
0x20110011
E1
-
-
Position fix mode
See
Constants for CFG-NAVSPG-FIXMODE
below for a list of possible constants for this item.
CFG-NAVSPG-INIFIX3D
0x10110013
L
-
-
Initial fix must be a 3d fix
CFG-NAVSPG-WKNROLLOVER
0x30110017
U2
-
-
GPS week rollover number
GPS week numbers will be set correctly from this week up to 1024 weeks after this week.
Range is from 1 to 4096.
CFG-NAVSPG-USE_PPP
0x10110019
L
-
-
Use Precise Point Positioning
Only available with the PPP product variant.
CFG-NAVSPG-UTCSTANDARD
0x2011001c
E1
-
-
UTC standard to be used
.
See
Constants for CFG-NAVSPG-UTCSTANDARD
below for a list of possible constants for this item.
CFG-NAVSPG-DYNMODEL
0x20110021
E1
-
-
Dynamic platform model
See
Constants for CFG-NAVSPG-DYNMODEL
below for a list of possible constants for this item.
CFG-NAVSPG-ACKAIDING
0x10110025
L
-
-
Acknowledge assistance input
messages
CFG-NAVSPG-USE_USRDAT
0x10110061
L
-
-
Use user geodetic datum parameters
This must be set together with all CFG-NAVSPG-USERDAT_* parameters.
CFG-NAVSPG-USRDAT_MAJA
0x50110062
R8
-
m
Geodetic datum semi-major axis
Accepted range is from 6,300,000.0 to 6,500,000.0 meters
This will only be used if CFG-NAVSPG-USE_USERDAT is set. It must be set together with all other CFG-NAVSPG-
USERDAT_* parameters.
CFG-NAVSPG-USRDAT_FLAT
0x50110063
R8
-
-
Geodetic datum 1.0 / flattening
Accepted range is 0.0 to 500.0.
This will only be used if CFG-NAVSPG-USE_USERDAT is set. It must be set together with all other CFG-NAVSPG-
USERDAT_* parameters.
CFG-NAVSPG-USRDAT_DX
0x40110064
R4
-
m
Geodetic datum X axis shift at the
origin
Accepted range is +/- 5000.0 meters.
This will only be used if CFG-NAVSPG-USE_USERDAT is set. It must be set together with all other CFG-NAVSPG-
USERDAT_* parameters.
CFG-NAVSPG-USRDAT_DY
0x40110065
R4
-
m
Geodetic datum Y axis shift at the
origin
Accepted range is +/- 5000.0 meters.
This will only be used if CFG-NAVSPG-USE_USERDAT is set. It must be set together with all other CFG-NAVSPG-
USERDAT_* parameters.
CFG-NAVSPG-USRDAT_DZ
0x40110066
R4
-
m
Geodetic datum Z axis shift at the
origin
Accepted range is +/- 5000.0 meters.
This will only be used if CFG-NAVSPG-USE_USERDAT is set. It must be set together with all other CFG-NAVSPG-
USERDAT_* parameters.
UBX-18010854 - R04
Advance Information
Page 215 of 259