u-blox ZED-F9P Interface Description - Manual
5.14 UBX-NAV (0x01)
Navigation Results Messages: i.e. Position, Speed, Time, Acceleration, Heading, DOP, SVs used.
Messages in the NAV class are used to output navigation data such as position, altitude and velocity in a
number of formats. Additionally, status flags and accuracy figures are output. The messages are generated with
the configured navigation/measurement rate.
5.14.1 UBX-NAV-CLOCK (0x01 0x22)
5.14.1.1 Clock Solution
Message
UBX-NAV-CLOCK
Description
Clock Solution
Firmware
Supported on:
•
u-blox 9 with protocol version 27
Type
Periodic/Polled
Comment
-
Header
Class
ID
Length (Bytes)
Payload
Checksum
Message Structure
0xB5 0x62
0x01 0x22 20
see below
CK_A CK_B
Payload Contents:
Byte Offset
Number
Format
Scaling
Name
Unit
Description
0
U4
-
iTOW
ms
.
See the
for details.
4
I4
-
clkB
ns
8
I4
-
clkD
ns/s
12
U4
-
tAcc
ns
Time accuracy estimate
16
U4
-
fAcc
ps/s
Frequency accuracy estimate
5.14.2 UBX-NAV-DOP (0x01 0x04)
5.14.2.1 Dilution of precision
Message
UBX-NAV-DOP
Description
Dilution of precision
Firmware
Supported on:
•
u-blox 9 with protocol version 27
Type
Periodic/Polled
Comment
• DOP values are dimensionless.
• All DOP values are scaled by a factor of 100. If the unit transmits a value of e.g. 156, the
DOP value is 1.56.
Header
Class
ID
Length (Bytes)
Payload
Checksum
Message Structure
0xB5 0x62
0x01 0x04 18
see below
CK_A CK_B
Payload Contents:
Byte Offset
Number
Format
Scaling
Name
Unit
Description
0
U4
-
iTOW
ms
.
See the
for details.
4
U2
0.01
gDOP
-
Geometric DOP
6
U2
0.01
pDOP
-
Position DOP
UBX-18010854 - R04
Advance Information
Page 141 of 259