u-blox NINA-W1 series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 47

u-blox NINA-W1 series Скачать руководство пользователя страница 5

NINA-W1 series - System Integration Manual

UBX-17005730 - R07

System description

Page 5 of 47

System description

1.1

Overview

The NINA-W1 series is a stand-alone Wireless and multiradio MCU IoT module suitable for industrial
markets where security is important. The NINA-W1 series includes the following tree variants as
listed in the table below:

Model

Description

NINA-W13 series

Wireless MCU module that integrates a powerful microcontroller (MCU) and a radio for wireless
communication. The NINA-W13x modules come with pre-flashed application software, supporting
802.11b/g/n in the 2.4 GHz ISM band. The host system can set up and control the module through the AT
command interface. This greatly reduces the time and complexity to add Wi-Fi and Bluetooth connectivity
to the end product. The NINA-W13x modules provide top grade security, thanks to secure boot, which
ensures the module boots up only with original u-blox software.

NINA-W15 series The NINA-W15x modules has similar performance as the NINA-W13x modules but provides support for

dual-mode Bluetooth (Bluetooth BR/EDR low energy v4.2) making it a multiradio gateway.

NINA-W10 series Multiradio MCU module that integrates a powerful microcontroller (MCU) and a radio for wireless

communication. With the open CPU architecture, customers can develop advanced applications running
on the dual core 32-bit MCU. The radio provides support for Wi-Fi 802.11b/g/n in the 2.4 GHz ISM band,
Bluetooth BR/EDR, and Bluetooth low energy communication. The module can be used to design solutions
with top grade security, thanks to integrated cryptographic hardware accelerators. This enables secure
boot, which ensures the module boots up only in the presence of authenticated software.

NINA-W1 modules have full modular approval for Europe (RED), US (FCC), Canada (IC / ISED RSS),
Japan (MIC), Taiwan (NCC), South Korea (KCC), Australia / New Zealand (ACMA)

1

, Brazil (Anatel)

1

,

South Africa (ICASA)

1

. The modules will be qualified for professional grade operation, supporting an

extended temperature range of -40 °C to +85 °C.

1

Approvals are pending.

«
...
3
4
5
6
7
...
»

Содержание NINA-W1 series
















































Отзывы:

Нет отзывов