EVK-NORA-B1 - User guide
UBX-20030319 - R05
Application development
Page 27 of 32
C1-Public
Figure 24: Load peripheral_lbs project
4.
Click
OK
. The project will be configured and opened in SES.
5.
No modifications are required for this project. Enter [F7] to build the project.
6.
Download the complied code to the EVK with [Ctrl+T], [L]
At this point, the
peripheral_lbs
sample is running. LED1 blinks at 1 second intervals to indicate that
the module is advertising with the name
Nordic_LBS
.
4.2
Test the application
Having loaded the network and application builds to the NORA-B1 module, follow the procedure
outlined below to test the application.
1.
Observe LED1 flashing. This indicates that the NORA-B1 is advertising for a connection.
2.
Install and open the nRF Connect for Mobile app on your mobile device.
3.
Start a scan and look for the
Nordic_LBS
or
Nordic_Blinky
device.
☞
The application loaded at the factory has the same functionality as the sample
Nordic_LBS
application, except it uses the advertising name
Nordic_Blinky
.
