Kit includes
• EVK-NINA-W15 board
• USB cable
• 2.4 GHz external antenna*
• Antenna cable*
*
EVK-NINA-W151 only
More information
For more information regarding
EVK-NINA-W15, contact your
nearest u-blox support:
www.u-blox.com/support
Driver installation
1. Connect the EVK-NINA-W15 board to
your PC using the included USB cable.
2. Verify that the USB drivers are in-
stalled successfully.
NOTE: In case the drivers are not in-
stalled automatically, refer to the
EVK-NINA-W15 User Guide.
3. Once the drivers are installed, a COM
port is enabled in Windows. Use the
Windows Device Manager to view the
port number (COM #) for the USB
serial port.
For EVK-NINA-W151 (with external
antenna), attach the antenna to the
antenna cable and connect the antenna
cable to the U.FL connector.
UBX-18063178 - R02
