EVK-JODY-W3 - User guide
UBX-20030840 - R04
Kit description
Page 5 of 29
Figure 1 shows the main components of the EVK-JODY-W3 evaluation board.
Figure 1: EVK-JODY-W3 outline showing main interfaces and connectors
The evaluation board design includes a module board and a carrier board:
•
The module board includes the JODY-W3 module and U.FL antenna connectors that connect
directly to the antenna pins on the module.
•
The larger carrier board hosts the module board and includes all the necessary connectors for
connecting the JODY-W3 series module to the host system.
Internal dual-band
antenna
Internal dual-
band antenna
SDIO
connector
USB connector
through FTDI
SMA connectors for
external antennas
GPIOs
PCM/I2S
interface
UART
pins
PCIe
connector
U.FL coaxial
cable connector
Module board
Evaluation
board (EVB)