Read all instructions before beginning any work. Cut all material to sizes shown in cutting schedule.
Assembly Instructions
Page Three
8. Laminate top boards (G) together using glue and 1
1/4
”
finish nails. Refer to Figure 6 and Isometric.
10. Attach top subassembly (G, H, I, J, K) to top board (F) from the inside using 1 1/4
”
wood screws through pre-drilled holes in
board (F). Refer to Figure 5 and Isometric.
12. Assemble drawer boxes (L, M) using glue and 1 1/4
”
finish nails. Refer to Figures 7 and 8 and Isometric.
11. Cut 1/4
”
wide by 1/4
”
deep dados in drawer sides (L). Refer to Figure 7 and Isometric.
13. Insert drawer bottom (N) into dados in drawer sides (L) and attach to boards (M) using 1 1/4
”
finish nails. Refer to Figure 8 and
Isometric.
14. Attach drawer guides to boards (L) and (E). Refer to manufacturer’s instructions.
9. Cut to fit and attach moulding (H), (I), (J) and (K) to
subassembly (G, G) using glue and 1 1/4
”
finish
nails. Refer to Figure 6 and Isometric.
20
1/4”
R 5/16”
3/4”
G
G
J, K
H, I
Figure 6
Cabinet Top (G, H, I, J, K)
Figure 7
Drawer Section (L, M, N) Front View
Figure 8
Drawer Section (L, M, N) Side View
L
L
N
N
M
M
1/4”
1/4”
1/4”
