5
4
EN
G
L
ISH
dry will cause inner pot color change, peculiar
smell, fuse tripping or even ire accidents.
CLEANING & MAINTENANCES
Body & Lid
Use the wet clothes to clean the surface.
• Don‘t rinse the thermos pot in water to
avoid the fault with the electronic parts.
• Don‘t use scour to avoid the peculiar
smell.
• Don‘t use gas or turpentine to avoid
damage of surface
lnner Pot
• Use the waterish sponge to wipe the inner
pot. Don‘t use any eradicator, grass brush
or nylon brush.
• Use the brush to clean the ilter. Assemble
the ilter inside the inner pot.
Clean the scale
After use for some time, the minerals such as
calcium are enclosed on the ilter and inner
pot, these are named as scale and harmless
to health.
• Milky grain
• White or blinking seston.
• Gray or green or colored grain.
The above materials aren‘t due to inner pot
color changed or corrupted or luoric resin
fallen off.
Caution
• Don‘t clean the thermos pot by the dish
washer or dryer.
• Make sure to keep the thermos pot dry
fully and sealed by a plastic bag in order
to protect it from insects.
• Use the waterish sponge to wipe lightly
the color changed part of the inner pot
above the Max. Level gauge. If the color
clanged seriously, try to clean several
times with citric acid.
Sealing Ring
lf the sealing ring turns to be hard or cracked
or there is some smoke leaking from the gap
of the lid, the sealing ring must be replaced!
Disassemble the screws and the lid shell (a),
then replace the sealing ring (b).
Use the citric acid to clean
1. lnstall the ilter inside the inner pot
2. Pour the citric acid into the inner pot by
the proportion of 20g to 1 litre water
3. Pour the proper amount of cold water to
the Max. Level guage and churn up the
mixed liquid fully.
4. Plug the power cord and heat the mixed
liquid up to be boiled. Then the thermos
pot turns to the keep warm mode. lf there
is still some dirt in the inner pot, press the
Reboil button to restart heating.
5. Unplug the power cord and disassemble
the lid. Pour the mixed liquid out from the
inner pot through the pouring place.
6. Add the cold water and heat up to be
boiled as usual. Pour out the water to get
rid of the smell of citric acid.
Please refer to the instruction manual to use
the citric acid correctly.
The used citric acid must be food additive
and harmless to the health.
TECHNICAL CHARACTERISTICS
Power: 750-900W
Power in the water temperature maintenance
mode: 35W
Volume: 2.8 l
Voltage: 220-240V
Frequency: 50Hz
Unit operating life is 3 years
Environment friendly disposal
You can help protect the environment! Please
remember to respect the local regulations:
hand in the non-working electrical
equipments to an appropriate waste disposal
center.
,
.
.
:
1.
,
.
2.
.
,
,
,
,
.
.
3.
,
.
4.
,
,
.
5.
,
.
.
6.
.
7.
.
.
8.
,
.
9.
.
10.
,
,
-
.
,
.
11.
.
,
.
,
.
12.
,
,
.
13.
.
,
.
14.
,
.
15.
,
,
,
.
16.
.
.
17.
.
18.
,
,
.
,
,
. (
.)
19.
. (
.)
,
.
20.
,
.
. (
.)
21.
,
.
,
22.
,
. (
