46
www.tytusgrills.com
6)
Carefully lift each burner up and away from the gas valve orifice.
7)
Clean the burner tubes with one of these three cleaning methods:
• Bend a stiff wire (a lightweight coat hanger works well) into a small hook, then run the hook through the burner
tube and inside the burner several times to remove any debris.
• Run a burner cleaning brush (or bott
le brush with a flexible handle) through the burner tube and inside the
burner several times, removing any debris.
• Use an air hose to force
air through each burner tube. The forced air should blow debris through the burner and
out the ports.
8)
Use a wire brush to clean the entire outer surface of each burner until they are free of food residue and dirt.
9)
Clean any clogged ports with a stiff wire, such as an open paper clip.
10)
Inspect each burner for damage (cracks or holes). If damage is found, order and install a new burner. After
installation, make sure that the gas valves are correctly placed inside the ends of the burner tubes, and check the
position of your spark electrode.
WARNING: The location of the burner
tube with respect to the orifice is vital
for safe operation. Make sure that
each gas valve is inside a burner tube
before using your grill. If the gas valve
is not inside the burner tube, lighting
the burner may cause an explosion or
a fire.
Burner tube
Tytus-Grills_19-0238_MAN_V1_ENG.fm Page 46 Friday, August 9, 2019 10:44 AM
