Tytan DM-135, Руководство пользователя

Страница: 5 / 17

5
4. Replacement decals can be purchased from your dealer
CHAPTER 2
SPECIFICATIONS
 TRACTOR SPECIFICATIONS
CAUTION:
Do not operate mower with a tractor that does not
comply with the following requirements:
Ⅰ
.Horsepower-27(minimum)
Ⅱ
.Counter balance weight :It
may be necessary to add weight to the front end and/or left rear wheel of your
tractor to maintain adequate tractor stability and weight of your tractor and the
conditions in which you are operating your tractor. Front tractor wheels must
remain firmly on the ground at all times. Contact between front, wheels and
ground must be firm enough to provide good steering control.
CAUTION: Regardless of tractor weight and size, it in
always necessary to exercise reasonable care during tractor
operation to avoid tractor rollover and/or loss of steering
control.
 MOWER SPECIFICATIONS
Model
DM 135
Length 2630
Width 935
Cutting width 1350
Weight 310 Kg
PTO speed 540 rpm
CHAPTER 3 OPERATING INSTRUCTIONS
 PREPARING YOUR MOWER FOR FIELD OPERATION
1. Check to be sure there are three blades on each drum. These blades
should be new or showing approximate equal wear.
2. A damaged or worn-out blade should be replaced immediately.
3. Damaged or worn out blade holders should be replaced immediately.
4. Be certain that PTO speed does not exceed 450rpm .
NOTE: It is very important that the machine be balanced. The high speed
of the drums (1720rpm) makes it imperative that the drums are equally
heavy on all sides so they are in balance. Both the drums and saucers
have been dynamically balanced at the factory and this balance should