- 12 -
Securing Scre
HDD Module
(HDD Inside)
3. Appendix
3.1. Replace Hard Disk
HDD Module
(HDD Inside)
Securing Screws
X 4
HDD Bracket
a.
Remove the securing screw of the
HDD Module from the POS unit.
b.
Pull out the HDD Module to detach it
from POS terminal.
w
c.
Loosen the securing screws to
remove the hard disk from the
bracket.
Then replace a new hard disk
d.
Secure the new HDD to the bracket
e.
Re-install the HDD Module (with new
HDD) back to the POS unit.
Note:
DO NOT push the HDD module with force.
If the HDD module cannot be re-installed
back to the HDD slot, it might be in the
wrong direction when secure the HDD onto
bracket.
Detach the HDD from HDD bracket and
overturn the HDD, then secure the HDD to
the bracket and install the HDD module to
the slot.
