Tysso BCP-8000, Руководство пользователя

Страница: 11 / 36

9
3.1.2. Connecting to PC by the cradle with RS-232 interface cable
DB9F Connector to RS-232

Turn off computer before connection.

Connect the DC plug of the power adapter to the power jack which located at the DB9F connector.

Connect the DB9F connector (with power jack connected) to PC.

Connect the AC Adaptor to an electrical outlet. The ORANGE power LED in front of the cradle
would be lighted. The cradle is ready for recharging the battery or terminal configuration.

Place the terminal onto the cradle. You may hear a beep sound when the terminal is placed onto
the cradle if the SETTING item “Key Click” is set to “Enable”.

There is a LED indicator on the top of the terminal and lit RED.
In the Display of the terminal there is a battery status icon indicates the battery status.

As the battery is being charged, the battery status icon is varying and indicates the battery is
charging. It takes approximately 6 hours to charge from low battery status..

When the battery is charged completely, the battery status icon will turn to static and the terminal
RED LED turns off.
3.1.3. Low Battery Warning
When the battery available capacity drops low, a flashing empty battery icon will be appeared at the right
bottom corner of the display. There are about 500 scans can be made after the warning occurred.
Note:
When Low Battery Warning appears:

Terminate the work.

Put the terminal back in the cradle to charge the battery.