Bluetooth Setup
˙
Press to turn on the meter. will appear when HT100-B has been detected (Fig. 59)
˙
Bluetooth is OFF by default.
˙
Please proceed the following steps.
To Transfer Memory Data
1. When the meter is switched ON, hold for 4 seconds to enter Bluetooth mode. will appear and flash on the meter when
meter is not connected with a mobile device (Fig. 60).
2. Turn on BLE tool APP (with Blood Glucose Test) and Bluetooth on your mobile device.
3. Click “Connect” and select the device shown (ex. TBMTXXXXXXXX) in APP list. stops blinking when
the meter & mobile device is connected.
4. Press the button on APP to transfer data. The meter will display while data are biing transferred (Fig. 61)
Bluetooth Data Transfer (HT100-B Only)
(Fig.59)
(Fig.60)
(Fig.61)
22