TYROLIT Hydrostress WCE30, Руководство по эксплуатации

Страница: 20 / 27

20 servicing anD mainTenance
Servicing and maintenance 5
Maintenance and servicing table
Befor
e star
ting up
On finishing work W
eekly
Annually If faults occur If damage occurs
Wire saw • Tighten loose screws and nuts
X X X
Guide rail • Clean guide bearing surface
X X X
Drive and guide rol-
lers
• Check rollers for wear
X X X X
• Check bandages for wear
X X X X
• Check bearings
X X X
• Clean
X X X
Feed cylinder
• Check for cleanliness / damage
X X X X
Drive motor
• Check for cleanliness / damage
X X X X
Connectors, cables,
couplings
• Check for cleanliness / damage
X X X X
Water economy • Check the water pipes/hoses are
clean and for leaks
X X X
• Blowing out water
X
Diamond wire • Clean with water
X
• Check for wear
X X X X
Service
• To be performed by TYROLIT
Hydrostress AG or an authorized
workshop
After 100/300/500/700 hours