TYROLIT
Hydrostress AG
Page 17
Feed Unit SB-E
Tool soft start
The control unit WSE2226
offers a tool soft start option. The soft-
start is perfect for wire sawing operations.
When set to the 32A position the control unit WSE2226
(pushbutton 13) provides the
option to operate at reduced power.
Proceed as follows:
X
Start the control unit WSE2226
, see 4.2.
X
Turn the main motor potentiometer (8) to the 0 position.
X
Press the main motor switch (7) to I.
X
Select the desired output level, see 4.4.
X
Slowly turn the main motor potentiometer (8) to 100% power.
Selecting the tool station (diamond wire speed)
Once the control unit WSE2226
has been started correctly it is possible to select the
diamond wire speed.
Selecting the power level
Peripheral speed – diamond wire
Speed
Gear at drive motor
Setting on the remote controller
0-10 m/s
Gear 1
Ø 2000 / 2200
0-11 m/s
Ø 1800
0-13 m/s
Ø 1600
0-17 m/s
Gear 2
Ø 1200
0-20 m/s
Ø 1000
0-24 m/s
Ø 800
Proceed as follows:
X
Check gear at gearbox of drive motor.
X
Set the diameter selector switch to the desired speed and turn the main motor
potentiometer from 0 to 100%.
The tool stations must not be changed during operation.
It is possible to reduce the speed of the diamond wire via the potentiometer for the main
motor. That simultaneously lowers the cutting capacity.
4.3
4.4